4-axis winding system for direct winding of inside slotted or outside slotted stators.
• 3-axis traverse drives for termination of the connections
• CNC-controlled stack positioning
• PC-control Beckhoff
• Wire installation system with 3-axis CNC

  • High fill factor via programmable traverse movements during winding
  • Automatic connection of each coil
  • Positioning of coil leads into slots for IDT’s, tangs or pull out loops
  • Freely programmable parameters
  • High ratio of standard versus customized tooling
  • Possibility of installation into a production line
  • Particularly suitable for large components
  • Automatic loading and unloading, can also be retrofitted
  • horizontal-vertical pivoting wire guide nozzles
  • Variant set for integration into a transfer system
  • Actuator for cantilever via CNC axis for very heavy stators

Machine

NWS/S

Number of spindles

/

1

Stack diameter

mm

500

Stack height

mm

800

Bore size

mm

min. 40

Wire size range

mm

AWG

Max. 5 mm

Axial speed / traverse axis

Max. 5 mm/sec.

Speed clamping tool

Max. 1000 U/sec.

Torque clamping tool

Max. 240 Nm.

Main power supply

3 x 400 V/N/PE, 50 Hz (+6% / -10%)

Pneumatic supply

bar

6-10

Weight (without equipment)

kg

Ca. 4500 kg